Ring Shank Nail / Hot Dipped Galvanized Ring Shank Nail / Pole Barn Nail
The hot dip galvanized ring shank pole barn nails feature a flat head with a ringed shank and diamond point. They are most often used for exterior post frame construction, and are made from high carbon steel, making them ideal for use with ACQ lumber.
Ring shank nails, also known as annular ring nails, are nails featuring rings on the shank for an additional 40% holding power than those with a smooth shank. This nail is extremely hard to remove without damaging the wood, as wood fibers settle into the space between rings and form a strong bond as the nail is driven into the soft wood. Removal of the pole barn nail results in a large and ragged hole if done so in a rough manner. For more information, please see the chart below.Specification：
|Nail Size||Nail Length||Gauge||Head Dia.||Count per Lb|
1. Wire is drawn from a coil and fed into the nail making machine. The subsequent deformed wire will form the head and point, then the nail is cut free from the rest of the wire fed from the roll. Nails with helical twists, serrations, or other surface configurations will be sent into another machine to be rolled, twisted, stamped, or cut into the required form.
2. The nails are then cleaned in a rotating barrel filled with hot caustic soda. This removes any oil from the forming machine and cleans away any small metal scraps that may cling to the nails. Finally, the nails are given a final bright finish before packaging.
3. Magnetic elevators convey the finished nails to the weighing machines, where they will then be drop ped into open cardboard boxes. As the common nails are drop ped in, a magnetic field aligns them so they stack in neat rows.
Packaging and Shipping
25kg/carton on a pallet, or according to customer requests. We supply various packaging types.